An official website of the United States government
A .mil website belongs to an official U.S. Department of Defense organization in the United States.
A lock (lock ) or https:// means you’ve safely connected to the .mil website. Share sensitive information only on official, secure websites.

News | Feb. 20, 2026

Army activates new command for ammunition and energetics production

By Michael Chambers

PICATINNY ARSENAL, N.J. – The U.S. Army has established the Capability Program Executive for Ammunition and Energetics (CPE A&E) at Picatinny Arsenal, under the command of Col. Jason Bohannon. The new CPE was formerly the Joint Program Executive Office for Armaments and Ammunition (JPEO A&A). The move is a key part of broader Continuous Transformation efforts intended to increase efficiency and accelerate the delivery of critical capabilities to the warfighter.

The new organization was activated at a ceremony held on February 12 at Picatinny Arsenal where team members and enabling partners were introduced to the new command. The Portfolio Acquisition Executive Agile Sustainment and Ammunition (PAE AS&A), Maj. Gen. John T. Reim, presided over the ceremony and spoke about the new organization’s significance in the Army’s Acquisition reform initiative.
 

“The team of the new CPE Ammo and Energetics has been entrusted to modernize the munitions industrial base, deliver advanced armaments and ammunition at scale, strengthen supply chain resilience, accelerate capability from concept to production, and ensure sustainment is agile, data-driven and ready for the next fight,” said Reim to the assembled audience.

“You are rebuilding an industrial base that will serve future generations of Soldiers we will never meet. That is our charge, that is our responsibility, and it's our distinct privilege to write the next chapter in the history of Army lethality. I have no doubt you will meet this challenge with the spirit, innovation, and dedication that has always been the hallmark of Team Picatinny.”

During its decades of existence as the JPEO A&A, the organization consistently delivered innovative acquisition solutions to provide Joint Warfighters and allied partners with overmatch capabilities. The new CPE A&E will retain the internal structure of the JPEO A&A, consisting of four project offices: Combat Ammunition Systems, Close Combat Systems, Maneuver Ammunition Systems and Joint Services. As the CPE A&E, it retains responsibility for life-cycle management, which includes integrating budgets, acquisition strategies, research and development, production, and fielding across all ammunition families.

In his first address as the Capability Program Executive, Col. Bohannon spoke to the legacy of JPEO A&A and the mission of CPE A&E.

“We’ve been given a tremendous foundation for success as we chart new territory and break new ground that will strengthen the Arsenal of Freedom. We've been given a directive from the administration and the Secretary of War. Although our mission isn't changing, we will change the way we do business. We will deliver 30 percent faster,” Bohannon said.

“We’re going to do it by identifying risks while still applying the rigorous rules that are required for the safety of our Soldiers, joint warfighters, and allied partners. We're going to find that balance and get it done right. When you get ammunition wrong, the lives of our Soldiers are at stake.”

After the ceremony’s conclusion, surrounded by numerous CPE A&E product displays, Bohannon stated, “When our Nation needs to express the will of the American people upon our adversaries, call on Picatinny Arsenal!”

Featured Stories
CANTON, OH – The U.S. Army and Metallus Inc. commissioned several new, state of the art manufacturing assets at the company’s facilities in Canton, Ohio. The newly commissioned assets include a bloom reheat furnace, roller furnace, and supporting equipment. The new assets will increase Metallus’ production capacity/volume of High Fragmentation (HF-1) Steel.
The U.S. Army and Metallus kickoff HF-1 steel capacity expansion effort with new manufacturing assets in Ohio
By Michael Chambers | Sept. 2, 2026
CANTON, OH – The U.S. Army and Metallus Inc. commissioned several new, state of the art manufacturing assets at the company’s facilities in Canton, Ohio. The newly commissioned assets include a bloom reheat furnace, roller furnace, and supporting equipment. The new assets will increase Metallus’ production capacity/volume of High Fragmentation (HF-1) Steel.

Milestone reached! Laura Emanski, Product Manager Small Caliber Ammunition, thanks the dedicated trade workforce during the dry-in ceremony for the new 6.8mm production facility at Lake City Army Ammunition Plant.
More exciting than watching concrete dry: Lake City’s new 6.8mm facility reaches dry-in milestone
By Daniel Jara | Aug. 31, 2026
INDEPENDENCE, MO - “Delivering tomorrow’s small caliber ammunition lethality today” is the guiding principle behind ongoing transformation at the Lake City Army Ammunition Plant (LCAAP) in Independence, Missouri. The U.S. Army is one step closer to bringing its next-generation manufacturing vision to life. On July 22, construction crews celebrated a dry-in ceremony for the 6.8mm Cartridge Manufacturing Facility at LCAAP. This ceremony represents a critical milestone meaning the building’s exterior shell is now complete and weather-tight.

PICATINNY ARSENAL, N.J. - Mr. Raymond Colon addresses the audience following the transfer of management.

U.S. Army photo by Todd Mozes
Changing of the guard for product manager offices at Picatinny Arsenal
By by Michael Chambers | Aug. 21, 2026
PICATINNY ASRENAL, N.J. Honoring age-old military tradition, various offices under the Portfolio Acquisition Executive Agile Sustainment & Ammunition (PAE ASA) held command change ceremonies recently. Typically, senior level military officers and SES civilian employees rotate through offices in lead or deputy roles to ensure institutional knowledge and expertise is preserved and shared throughout the wider organization.

Portfolio Acquistion Executive Agile Sustainment & Ammunition

TDP Industry Request

Whistleblower Protection Act Information

iSalute

If you have information that may be of interest to U.S. Army Counterintelligence, please submit an iSALUTE Suspicious Activity Report.

Submit Report

You may also report by telephone:

[CONUS]
1-800-CALL-SPY
(1-800-225-5779)

[EUROPE]
+49 (0) 611 143 537 2176
DSN 314-537-2176

[KOREA]
0505-723-3299
DSN 723-3299